# Solapur Upvibhagiya Dandadhikari Police Patil Question paper Set 2

1. If the area of a circle is 154 cm2, find its perimeter:
2. 44 cm
3. 48 cm
4. 66 cm
5. 22 cm

Ans: – 66 cm

1. If the perimeter of a rectangle is reduced to its half, then its area will be:
2. A) Reduced to its half
3. B) Reduced to its 1/4th
4. C) Reduced to its 3/4th
5. D) Area remains the same

Ans:- Reduced to its 3/4th

1. The cost of painting the interior of a room of dimensions 8 m length, 6 m width and 3 m height, if the cost of labour and paint is Rs. 10 per square m:

1. A) Rs. 840
2. B) Rs. 820
3. C) Rs. 860
4. D) Rs. 800

Ans:-  Rs. 860

1. A scalene triangle is a triangle:

1. A) With equal length for the three sides
2. B) With two sides of equal length and third side different length
3. C) With unequal length for the three sides
4. D) None of these

Ans:- With equal length for the three sides

1. Find out the dimensions and perimeter of a square plot, if its area is equivalent to the area of a rectangular plot of dimensions 90 m length and 40 m width:

1. A) 40 m X 40 m, 160 m
2. B) 60 m X 60 m, 360 m
3. C) 80 m X 80 m, 320 m
4. D) 60 m X 60 m, 240 m

Ans:-  80 m X 80 m, 320 m

1. The number of standard bricks required to construct a brick wall of length 6 m, height 3 m and

thickness 20 cm is:

1. 1500 Nos
2. 1800 Nos
3. 3000 Nos
4. 2500 Nos

Ans:- 3000 Nos

1. Capacity factor is :
2. A) The ratio of average discharge of a canal at any point to the full supply discharge at the same point

1. The ratio of average discharge to the number of days the canal has actually run
2. The ratio of duty at the outlet to the discharge
3. None of these

Ans:- None of these

1. Fall of moisture from atmosphere to the earth surface in any form:

1. Evaporation
2. Run-off
3. Transpiration
4. Precipitation

Ans:- Precipitation

1. Grayness are:

1. The structures constructed parallel to the direction of flow and extend both upstream and downstream of the abutments
2. The structures constructed transverse to the river flow and extend from bank to the river
3. The irrigation work constructed for passing the canal water over the drainage.
4. None of these

Ans:-  The structures constructed parallel to the direction of flow and extend both upstream and

Downstream of the abutments

1. 2.5 Acres is:

1. 752 Hectares
2. 212 Hectares
3. 012 Hectares
4. 512 Hectares

Ans:- 2.212 Hectares

1. Find the duty of paddy in Hectares/Cumec, if depth of water over area required = 1500 mm and base period is = 150 days:

1. 4
2. 864
3. 64
4. 8640

Ans:- 8640

1. Maximum flood discharge in Cumecs for South Indian Catchments by Ryve’s formula

1. Q = CM2/3
2. Q=CM3/4
3. Q=CM1/2
4. Q=124 A/(A+10.4)1/2

Ans:- Update soon

1. When a column of water is standing against the face of any irrigation structure and if the structure happens to be one constructed on permeable foundations, the water starts moving under the foundations with certain amount of pressure. This is called:

1. Creep
2. Uplift
3. Percolation
4. Scour

Ans:- Scour

1. Among the following, which one is an example for non-recording type rain gauge?

1. Weighing bucket rain gauge
2. Float type rain gauge
3. Tipping bucket rain gauge
4. Symon’s rain gauge

Ans:-  Float type rain gauge

1. To prevent overtopping of a dam during the period of peak, a sufficient marigin is left between FRL, and top the dam. It is known as:

2. Free board
3. Live storage
4. Spillway

Ans:- Update soon

1. Canal escapes are:

1. Structures constructed to dispose off excess water from the canals to some natural drains
2. A vertical step in the channel bed
3. An irrigation structure constructed for passing the canal water over the drainage
4. None of these

Ans:- Update soon

1. The major axis of an ellipse is:

1. The line perpendicular to the tangent at any point of the ellipse
2. The line passing through the foci and terminated by the ellipse
3. The line tangential at any point of the ellipse
4. None of these

Ans:- Update soon

1. The curve generated by a point on the circumference of a circle which rolls without slipping along a straight line is called:

1. Spiral
2. Trochoid
3. Cycloid
4. Involute

Ans:-  Spiral

1. Visible edges are represented by:

1. Continuous thin lines
2. Dashed thick lines
3. Thick chain line
4. Continuous thick lines

Ans:-  Dashed thick lines

1. Dimension on the drawing can be found out as:

1. F x Actual dimension
2. F / Actual dimension
3. Actual dimension / R.F
4. F x maximum length to be read

Ans:-  Actual dimension / R.F

1. For a regular pentagon, the interior angle formed is :

1. 1200
2. 900
3. 720
4. 600

Ans:-  900

1. For an ellipse, the sum of the distances to a point on the curve from the foci is :

1. Not a constant
2. Constant and is equal to the length of the major axis
3. Constant and is equal to the length of minor axis
4. None of these

Ans:-  Constant and is equal to the length of minor axis

1. the length to width ratio of a drawing sheet is:

1. 21/2:1
2. 1:21/2
3. 1:2
4. 2:1

Ans:- Update soon

1. Normally earthwork is estimated for :

1. 30 m lead and 1 m lift
2. 20 m lead and 1.5 lift
3. 50 m lead and 1.5 lift
4. 30 m lead and 1.5 lift

Ans:-  20 m lead and 1.5 lift

1. the approximate cost of a building having plinth area of of 300 Sq.m @ Rs 1500 per Sq.m works out as:

1. 3,25,000
2. 3,75,000
3. 4,50,000
4. 4,00,000

Ans:- Rs. 3,25,000

1. The amount provided in the estimate and bill of quantities for some specialized work to be done by a specialist firm whose details are not known at the time of preparing estimate is called:

1. Float value
2. Fixed cost
3. Provisional sum
4. Prime cost

Ans:-  Provisional sum